2000 Hyundai Accent Logo

Related Topics:

A
Anonymous Posted on Jul 03, 2014

2008 hyundai accent 1.6l DOHC map sensor vacuum leak

5 Related Answers

Molson02536

Harvey N Tawatao

  • 3854 Answers
  • Posted on Apr 08, 2009

SOURCE: Replace oil pan on my Hyundai accent 2004

You can try to re torque the bolts before you drop the pan and re place the gaskit if that is where your leak is coming from. Good luck and hope you don't have to drop the oil pan. 

Ad

Anonymous

  • 2050 Answers
  • Posted on Oct 01, 2009

SOURCE: hello i have a 2008 hyundai accent gls. it has

Get it scanned. You should be under warrantee. Otherwise most auto parts stores will do this. Could be as simple as a loose gas cap.

ghost45

PAUL MC G

  • 1280 Answers
  • Posted on Oct 04, 2009

SOURCE: 2002 Hyundai Accent 1.6 Check engine code

Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Anonymous

  • 507 Answers
  • Posted on Oct 26, 2009

SOURCE: license plate bulb replacement 2008 Hyundai accent

go to license plate look above it and you will see the globe or globes remove cover and replace bulb,can get at garage

johnjohn2

Johnny Brown

  • 5763 Answers
  • Posted on Jun 12, 2010

SOURCE: i looking for the location of the crank sensor

The crank sensor on this 2000 hyundai accent is located on the leftside of engine near the rear exhaust manifold.this is if your standing on the driverside looking at the engine your left is the side the front is on, hope this helps, heres a picture to help you.abcbb01.gif

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the MAP sensor?

Learn how to use YouTube. Go to the YouTube web site, and in the search box at the top of the screen type "2001 hyundai accent map sensor". Look at the videos it brings up -- it may not show exactly a 2001 Accent, but you should be able to find an engine that looks like yours and see where the MAP Sensor is.
0helpful
1answer

Location of a map sensorfor a2002 hyundai accent 1.6L DOHC 16V

It is located in the air intake to the engine, MAF stands for "Mass Airflow Sensor" See photo of sensor below.
ma238_top_p04__ra_p-gaxgiasrtmqhmhzchpevzv55-3-0.jpg
0helpful
3answers

PO-139 I had that sensor change 3 weeks ago and the check engine light came on again this morning.Thanks

Probably replaced a good sensor. This codes could be from a bad sensor, a vacuum leak, or an exhaust leak before the sensor.
3helpful
1answer

I looking for the location of the crank sensor hyundai acccent 2002 1,6L

The crank sensor on this 2000 hyundai accent is located on the leftside of engine near the rear exhaust manifold.this is if your standing on the driverside looking at the engine your left is the side the front is on, hope this helps, heres a picture to help you.abcbb01.gif
0helpful
1answer

2002 hyundai accent running rough i've changed plugs wires and oxygen sensor

Clean the IAC and check for vacuum leaks on all the vacuum hoses. Please rate me on this answer.
5helpful
1answer

Check engine light on code reads p2096 what

Fuel trim too lean. Usually means vacuum leak. Look for crushed,broken or melted off vacuum hoses near intake manifold. Or an obvious hissing noise at a normal idle. If so replace or repair clear codes your done. If not obvious take carb cleaner spray with nozzle attached car running & go over all vacuum hoses,intake manifold,egr valve see if idle raises if so you found leak. Repair. Could also be bad oxygen sensor switching bad o2 sensor but rarely.
1helpful
1answer

2001 hyundai accent. hard to start when engine is cold. has new air & fuel filter, and plugs. starts fine when at operating temperature.

Without actually looking/diagnosing your vehicle, the problem could be just about anything (fuel pressure, out of time, vacuum leak, defective sensor (i.e., MAP, MAF, ECT, IAT, CKP, etc.), Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there.
Not finding what you are looking for?

445 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...