How do i remove the rear brake rotors on a 2004 chrysler sebring convertible?

SOURCE: 1995 chrysler sebring lxi

there are four 18mm bolts on the opposite side of dust plate.once u remove thoe bolts,you'll have to either use a slide hammer, or the old fashion way a big hammer and smack it side to side.the whole hub and wheel bearing assembly will come out.The dust sheild is in between the hub and axel once it comes apart u will understand.

Marvin

• 85242 Answers
• Posted on May 20, 2009

SOURCE: i need to know how to change the brakes and rotors on a 1996 chrysler sebring convertible jx series.

Go to link below for instructional video's on brake rotor replacement.

http://video.google.com/videosearch?q=how+to+replace+brake+rotors&www_google_domain=www.google.com&hl=en&emb=0&aq=0&oq=how+to+replace+brake+r#

SOURCE: I'm changing the rear brakes on my 2000 Chrysler

If the caliper is loose after taking off the caliper then all you gotta do is remove the caliper housing. The part the caliper is bolted to. It's usually two big 16 or 17 mm bolts.

SOURCE: cable broke on driver side rear window regulator for 2006 chrysler sebring convertible window won't go up. can the cable just be replaced?

As far as i know, yes. just go to a crysler dealership and get them to order it for you.

SOURCE: brake petal goes to the floor then you can pump it up.

Bleed your brakes. one at a time. Bleed all four brakes starting at the rear drivers side brake then the front passenger, the rear passenger and lastly bleed the drivers front brake line. Let us know how u did.