Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jul 02, 2014

What does a 454 engine accessory bracket diagram look like

3 Related Answers

roniecon

Ronny Bennett Sr.

  • 6988 Answers
  • Posted on Sep 24, 2009

SOURCE: i need the firing order diagram for a 1977 chevy 454 engine

1365472, 1 3 5 7 are on the pasengers side 2 4 6 8 are on the drivers side.

Ad

Anonymous

  • 187 Answers
  • Posted on Sep 26, 2010

SOURCE: does a 1996front pully bracket

Hi, the aluminum drive brackets from a vortec small block will not fit a big block, especially an older one, due to hole location, bracket shape and size. Thanks...coop

boyd0384

  • 42 Answers
  • Posted on Mar 09, 2013

SOURCE: show diagram for sparkplug wiring on 1996 chevy 3500 454 engine

1-8-4-3-6-5-7-2 GM motors are numbered on the driver side as 1-3-5-7 and on the passenger side as 2-4-6-8. These numbered cylinder go from the front of the motor toward the back. Hope this helps.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can I get a wiring diagram for the motor on a 454 1986 Southwind RV and for the radiator and where the hoses go

You need the details of the engine and chassis that they RV is built on. Normally something like a Ford F-350. Once you know that, you can search for parts and diagrams. Looks like a Chevy 454 P chassis. Then it depends on what hoses? A properly crafted search query can find most things.

https://www.google.com/search?q=Chevy+454+P+hoses

https://www.google.com/search?q=454+1986+Southwind+RV

https://www.google.com/search?q=wiring+diagram+for+the+motor+on+a+454+1986+Southwind+RV

..
0helpful
1answer

Where can i find an online vacuum hose schematic for 1985 Sportscoach III motorhome has a 454 engine with Rochester 4bl carb. ?

Hi Dennelle,looked all over for the 85 model,found a 86 454 vacuum lines,may be the same.Follow this link,it's at the bottom. Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com
0helpful
1answer

Does a 1996front pully bracket assembly fit on a 1972 454?if it does i need a diagram how its set up.thanks for ur advice.aloha

Hi, the aluminum drive brackets from a vortec small block will not fit a big block, especially an older one, due to hole location, bracket shape and size. Thanks...coop
1helpful
1answer

Rebuilt chevy 454 engine, now need distributor and

just put a new starter in my 1993 chevy 454 and now i'm not getting fire, the old starter solenoid was sticking and melted the neg battery cable. I'm wondering if that also burned something else out?
6helpful
3answers
4helpful
2answers

I need the firing order diagram for a 1977 chevy 454 engine

1365472, 1 3 5 7 are on the pasengers side 2 4 6 8 are on the drivers side.
0helpful
1answer

1993 gm 454 engine fan belt assembly

Go to www.autozone.com and click on repair info and enter in car info and then click on repair manuals and a manual for your vehicle will come up and it should be listed in that manual. Sometimes the diagram is on the hood of the vehichle rather than on the engine compartment but you probably already looked there... Hope this helps
please rate my answer
17helpful
1answer

2002 ford taurus wtaer pump

Removal & Installation 3.0L (2V) To Remove:
  1. Drain the engine cooling system.
  2. Loosen the water pump pulley.
  3. Remove the bolt and the nut and position the roll restrictor bracket out of the way.
  4. Remove the accessory drive belt.
  5. Remove the generator.
  6. Remove the bolt and the accessory drive belt tensioner.
  7. Remove the nut, the bolt and the support bracket.
  8. Remove the bolts and the water pump pulley.
  9. Disconnect the water pump inlet hose and the crankshaft position sensor electrical connector.
  10. Remove the bolts and the water pump, and clean the sealing surfaces
To Install:
  1. Install the water pump. Tighten bolts in the sequence shown:
    1. Tighten numbers 1-7 to 18 ft.-lbs. (25 Nm)
    2. Tighten numbers 8-12 to 89 in.-lbs. (10 Nm)
    3. Connect the crankshaft position sensor electrical connector and the water pump inlet hose
    4. Install the support bracket.
    5. Install the accessory drive shaft tensioner.
    6. Install the generator.
    7. Install the roll restrictor bracket, bolt and the nut.
    8. Install the water pump pulley.
    9. Install the accessory drive belt.
    10. Connect the battery ground cable.
    11. Fill the engine cooling system.

9de9feb.gif
Water pump bolt torque sequence (3.0L (2V) engine)
44helpful
1answer

I need the diagram for the spark plug wiring harnes for a 454

you need firing order and distributor rotation ? here is a pic of the 454 big block chevy engine wiring diagram . cheers .
bd21fdf.jpg

Not finding what you are looking for?

303 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...