2001 Lexus IS 300 Logo

Related Topics:

A
Anonymous Posted on Jul 02, 2014

Oem code for lexus

Codes p0440-p0441 -p0446

1 Answer

Luis Herrera

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jul 19, 2021
Luis Herrera
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jul 17, 2021
Answers
1
Questions
1
Helped
203
Points
1

Eva system. I'm guessing a PCV needs cleaned or replaced. Sometimes the gromet that it sites in gets briddle and cracks and you can lose vapors that way also

5 Related Answers

Anonymous

  • 1861 Answers
  • Posted on Nov 13, 2008

SOURCE: car codes

When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.

Ad

Anonymous

  • 39 Answers
  • Posted on Apr 23, 2009

SOURCE: 2000 lexus es300 error code p0440, p0441, p0446

P0440 Evaporative Emission System, P0441 Evaporative Emission System Incorrect Purge Flow , AND P0446 Evaporative Emission System Vent Control Circuit

Anonymous

  • 254 Answers
  • Posted on Jan 10, 2011

SOURCE: my check engine light come up w/ all these code

po305 is related to missfire on #5 cylinder
po440 is related to fuel tank pressure
pO441 is for evaporator purge flow malfunction
po446 relates to vent control valve electrical circuit malfunction

missfire is seperate from the other codes
as for the other three codes replace the vent control valve solenoid located near the charcoal canister the oth3er codes can relate to a faulty solenoid

after replacing light will only go out if you clear through a scan tool or three drive cycles of over 10 min each

clifford224

Clifford Beard

  • 1975 Answers
  • Posted on Apr 05, 2012

SOURCE: 99 lexus GS-400 P420, where is the O2 sensor? Need Pics not words

Below is a picture of the location of both O2 sensors for your vehicle. Also the last picture is your evap. system. In the "dotted lined" area I would check for rotten or lose hoses in that area as well the vapor pressure sensor could be faulty as well. Hope this helps.

4_5_2012_6_18_20_pm.jpg4_5_2012_6_18_37_pm.jpg4_5_2012_6_18_51_pm.jpg

skychief2001

Stephen

  • 21873 Answers
  • Posted on Mar 02, 2013

SOURCE: what is an evaporative control system in a lexus 2002

The computer vents vapors in the gas tank to the vapor canister while the engine is running by opening valves.
Based on the codes you have, one of the valves or solenoids is not working correctly and would need to be tested.
The mechanic would use the test procedure for each code to troubleshoot the problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have 4 codes coming up on my pocket scanner,they are p0446,p0440,p0441,and another p0446 what are these for

P0440 = Evaporative Emission System.
P0441 = Evaporative Emission System Incorrect Purge Flow.
P0446 = Evaporative Emission System Vent Control Circuit.
The vehicle is fitted with a system that recycles unburnt fuel in the exhaust gases, usually referred to as the EVAP system. This sounds like a possible issue with the valve built into this system.
0helpful
2answers

Hello there,my 2001 echo is lighting up trouble codes p0440 p0441 p0446; how and where should i start?

code p0440 refers to evaporative emission (EVAP) system--malfunction=== causes --hose connections --intake leak--EVAP canister purge valve
code po441 refers to EVAP --incorrect flow detected==causes the same as for po440
code po446 refers to EVAP system vent control --circuit malfunction===causes --wiring---EVAP can purge valve--ECM
generally I would replace the purge valve as it is common to all codes
12helpful
3answers

P0440, P0441, P0446

where is Evap Emission Control System Purge Flow fault
31helpful
3answers

2000 lexus es300 error code p0440, p0441, p0446

P0440 Evaporative Emission System, P0441 Evaporative Emission System Incorrect Purge Flow , AND P0446 Evaporative Emission System Vent Control Circuit
5helpful
1answer

2001 corolla chack engine light on.

P0440= Evap Control Sys Malfunction
P0441= Evap Control Sys Purge Flow Fault
P0446= Evap Control Sys Vent Ckt Malfunction
1helpful
1answer

2001 Lexus engine check light on VSC off light on

You can actually google this by putting lexus code ### for each one it will tell you what each one means
34helpful
3answers

P0440,p0441,p0446

These codes are all for the Evaporative Emissions System.

P0440- Evaporative emissions system fault- just saying there's something wrong with the system.

P0441- Evaporative emissions system- Incorrect purge flow- saying that the system isn't purging the raw fuel vapors (hydrocarbons- HC) as well as it should.

P0446- Evaporative emissions system- Control valve circuit low- there is a valve, usually located on the charcoal canister at the rear of the vehicle, that opens to allow fresh air to enter the evaporative emissions system as the engine vacuum purges the fuel vapors from the charcoal canister and closes when purge is not needed to prevent leakage of those fuel vapors to the atmosphere (HC is a greenhouse gas and is regulated as such by the fed gov't).

Given that you have the incorrect purge flow code and the control valve code together, my bet is that the vent control valve has failed (causing the P0446) and is not opening to allow fresh air into the system to displace the air from within the system that is being pulled to the engine. Since you have no fresh air entering the system, the engine will pull a vacuum on the system instead of the vapors "flowing" into the engine (causing the P0441).


I hope that this is helpful to you!!!


ASE Master Technician with L1 and X1 Certifications; Nissan Scope Technician; Chrysler Level 3 Silver Technician- 12+ years experience.


5helpful
2answers

Car codes

When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.
11helpful
1answer

HAVE A CODE PO446 1999 LEXUS GS300 CHECK GAS CAP AND IT WAS OK. WHAT DO I LOOK FOR NEXT AND LOCATION OF IT

P0446 is an evap code. Most likely, you need to change the charcoal canister vent valve (CCV) under the trunk floor. Fuel cap codes set 3 codes at once, P0440. P0441 and P0446, all at the same time.
4helpful
1answer

2002 prizm with p0440 code

Man, here is a link with the perfect solution:

http://ca.answers.yahoo.com/question/index?qid=20080609120625AAf6UmP
Not finding what you are looking for?

213 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...