Engine wont start - 1990 Subaru Legacy

The first thing that you must do here is to have the systems computer checked for fault codes, it should have a few in memory. the codes are read through the diagnostic port under the dash.

Engine cranks but won't start. Troubleshooting tips

www.samarins.com/diagnose/index2.html

In this guide, we are going to look into no-start problems when the car engine cranks,but won't start. If your engine won't crank at all, check the first part No-start: ...‎Why a car won't start - ‎Crankshaft position sensor - ‎Check Engine light

Engine cranks but won't start - YouTube

? 8:03
https://www.youtube.com/watch?v=1L4nB2NdA0U
May 16, 2014 - Uploaded by jimthecarguy
2003 Ford Taurus 3.0 liter 24 valve no start cranks OK.You will not ... Car will not start trouble shooting guide, wont crank, wont turn over, etc.

Problem 5: Engine Cranks But won't Start

WHAT DO U MEAN IT WONT START?IT WONT START FROM A DEAD BATTERY?? CRANKS BUT WONT START??LET ME KNOW

The belt is worn out and is disintegrating. It has probably jumped time. The reason the engine won't start. Depending on your car, Some engines are no tolerance. Meaning if you keep cranking it and the belt breaks, the pistons can slap the valves, bending or breaking them. Replace the belt.

Check fault codes as I thing the crank position sensor is at fault

Are you saying the starter is grinding but the engine is not cranking, or the engine is cranking and making noise and not starting ?

hi, i have nissan terrano wen i switched on engine light flash and start engine its start then go of.nissan terrano patrol engine

have u checked to see if theres any gas in the fuel tank

when you say it wont start will the engine turn over?
if it wont turn over i think you should check your battery connections
if the engine turns over then you need to check your fuel pressure and spark and let me lknow

1. hold gas pedal to floor while trying to start. do not pump pedal.
2. holding pedal to floor is how you start a flooded f.i. engine