Timing marks diagrams

ALIGN THE TIMING MARKS AS PER THE ATTACHED FOTO. on the gears there are timing marks.

has the timing chain been replaced

when you get your parts the store can print out the instructions and timing mark pictures for you..

the cam and crank has marks called timming marks these line with marks on the block

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 2001 Volvo S40. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/volvo/model/s40/2001_volvo_s40_timing_belt_diagram_marks.htm

there isnt marks!the cam pulleys have do nothing with timing!remove the valve cover and see in the other end of the camshafts and find two eccentric cuts!turn the crankshaft to the top dead point on the cylinder 1 the two cuts must be in the same line on the upper or lower side.you need aspecial tool to lock the camshafts and another to lock the crankshaft!this is the timing procedure!now you can change anything you want!note!the cam pulleys are conejointed to the camshafts!no marks no pins no safe pins etc.isnt difficult but complicated simple!

Ther are none. It takes a tool to hold the cams in place while the valve cover is removed. Get a chilton book from the library.

here are the timming marks



the other important thing is to
Rotate the automatic tensioner hex–key tab anti-clockwise until the adjust arm pointer of the timing belt automatic tensioner is aligned with the notch in the timing belt automatic tensioner bracket.
then turn engine over 2 turns and recheck marks and tensioner pointer

You need to state your engine type; but if you look back on my posts you should find a diagram to suit