Need the firing order to place sprk plug wires in correct firing position
SOURCE: Firing order for Spark Plug wires
Here is the diagram you ask for. While it says it is for the 3.0L V6, it is the same for the 4.0L V6 if that's what you have...
SOURCE: removed spark plug wirers need firing order Ford Expedition 1999
Several engine sizes there...
1999 Ford Expedition 4.6 liter SOHC V-8 VIN "6"
1999 Ford Expedition 4.6 liter SOHC V-8 VIN "W"
1999 Ford Expedition 5.4 liter SOHC V-8 VIN "L"
Hope this help to solve it (remmeber comment and rated this).
SOURCE: Firing Order diagram for 2006 Ford Explorer
Hope this helps.
The ignition coil:
Spark plug wires:
The spark plugs:
The firing order is 1-4-2-5-3-6.
SOURCE: need ford ranger 1990 engine
For 1990 Ford Ranger 2.9 liter V-6 VIN "T" check the next firing diagram...
Hope this helps (remember to rate and comment this free answer)
SOURCE: need spark plug firing order and wire diagram for
1995 Ford F 150 Pickup 5.0 liter V-8 VIN "N"
Hope this helps (remember to rate this free answer).
The firing order is ( 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 )
The distributor rotor turns COUNTERCLOCKWISE
The marked # 1 position on the distrubutor cap faces to the REAR and slightly towards the drivers side
The engine cylinders / spark plug locations are numbered :
firewall
4 - 8
3 - 7
2 - 6
1 - 5
front
If someone has altered the disstributer, pull #1 plug, put finger over hole, turn engine over until compression on that cyl, line up timing marks (ball park only) and rotor will be pointing at the correct terminal for #1 cylinder plug wire connection, in the cap.
862 views
Usually answered in minutes!
×