SOURCE: 2002 hyundai accent codes p1529 and p0734
P1529 means nothing more than the TCM (transmission control module) has
requested that the ECM (engine control module) turn on the check engine
lamp.
P0734 basically indicates that your transmission is slipping.
You need to take this car to an authorized repair center for hyundai cars. Replacing the filter and fluid on the transmission might save this transmission but I would be willing to bet that a total transmission rebuild is in order.
Good Luck
SOURCE: replacing exterior door handle 2003 hyundai accent?
remove door panel which is attached by screws,peel away plastic liner and look inside door at back of door handle..using needle nose pliers pop off the small steel rods that are for inside door mechanism,then remove the one bolt that attaches the handle to the inside of door and from outside of door remove handle.Replace in reverse order!
SOURCE: my 2005 hyundai accent wont shift out of park
on most cars when u step on the brake pedal youll hear a "click" near the center console which is the shift solenoid releasing the "lock" on the floor shifter allowing the shifter to come out of park.check to make sure all the fuses are good and check the brake lite switch(es) and wiringfrom brake lite switch to shifter solenoid.a wiring diagram always helps.
SOURCE: Help! 2003 Hyundai Accent problems. Transmission??
well the first thing you need to do is to pull the stored codes in the computer and see what they say and then go from there, this could be a speed sensor or a trany going bad , i dont know if this is an automatic or standard trany, start with the codes from the check engine light, autozone car parts store will scan the computer at no charge,
57 views
Usually answered in minutes!
×