Rover workshop manual

SOURCE: Range Rover Sport Supercharged radio frequency problem

you need 2 remove your radio and open you shloud change the ic for frequency to work it is very easy to change it if youneed ana help contact me

SOURCE: how do i change drive belt on p38 range rover

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.
Not sure if this what you need for the "P38" but it is for the 1996 Range Rover.

I do not know if you still need this information, but I am going ahead and answering it anyway.

Click on the following Link. It has the several Serpentine Belt Diagrams, one of which matches your specific vehicle with your particular options (AC, Power Steering etc..).

Regarding HOW:
Standard Rule to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped...

http://www.2carpros.com/car_repair_information/year/1996/make/land_rover/model/range_rover/1996_land_rover_range_rover_drive_belt_routing_diagram.htm

SOURCE: 1999 range rover supercharged serpentine belt diagram

should be located under the hood of the car if not u can go to any local auto parts store and ask for a print out

SOURCE: what is the recomended service items for 40000

Replace your spark plugs and spark wires.
Check you tire alignment and engine oil levels and replace your fuel filter.
Check your transmission fluid and coolant levels and brake fluid levels.
Cabin air filter replacement is also recommended.
Check your battery output voltage and see if an recharging is required.

SOURCE: I need a manual for a 2008 range rover

I'm also looking for a 2008 RR Sport manual. I was told that they only come on disks now and getting a replacement would cost $150...