My Subaru tribeca 2006 had the check engine,cruise control flashing and abs lights on. I will get trouble codes tomorrow at O- Reillys.
Hello,do post your DTC'S,(diagnostic trouble codes) and may be i can help.many modern vehicles spring up a multitude of warning icon's on the dashboard,much to the alarm of it's owner,however,often it can be as simple as a dirty wheel speed sensor,which fails to provide the necessary information to the main (ABS/TRACTION control unit) and so then will inhibit the cruise control,as naturally it's unable to ascertain road wheel speed,and also throw up the engine management light,as the braking/traction control systems unable to supply correct information to the main engine computer(ECU,OR PCM) electronic control unit/power control module. hope this helps,but please supply any further information that you can,regarding your DTC'S, that are read out,try to get a full print off,if at all possible, cheers.
Testimonial: "thanks...."
here it is....p0028.....intake valve control solenoid circuit range performance bank 2...any advice? Thanks a ton!
It appears that the variable valve control solenoid,is either defective,or in my estimation,it is most probably abnormal wear on the mechanical side of the engine(timing chain excessively worn,hence synchronisation of the cam/crank relationship,is beyond the mapped parameters,however,do get an auto electrician to test the solenoid,check the resistance,and if at all possible,scope the various sensors up(oscilloscope)to view live data.hope this helps, cheers.
×
1,459 views
Usually answered in minutes!
×