SOURCE: CANT FIND CRANK SENSOR
The sensor is mounted in a fixed position in the engine block. The tip of the sensor protrudes into the crankcase at a distance of 0.05 plus or minus 0.02 inch from the crankshaft.
SOURCE: how do i get the crank position sensor out of a
the plug is attached to the intake the easiest way to change it is from under the vehicle it is bolted to the top of the bell housing you can get it with a 1/4 in drive universal socket and a long extension and rachet and after you remove the 2 bolts holding it in pull it up and out of the bell housing then reinstall in reverse order
51 views
Usually answered in minutes!
×