SOURCE: 96 jeep cherokee headlights
The headlights are on a relay and maybe its getting weak. I would have it checked and replaced because it could go out and stay out.
God Bless Greg
Oh yeah most of the time it is built into the head light switch.
SOURCE: How to replace headlights on 2000 Jeep Grand Cherokee
One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.
SOURCE: what weight oil does a 96 jeep cherokee use
dont know for sure how true this is but ive always used 10w30 in them.sometimes it will tell you under the hood on the sticker with the info or your nearest oil change station has the capability to look up what the manufacturer calls for.I think all older chryslers ran 10w30 though
SOURCE: HOW TO REMOVE HEADLIGHT ASSEMBLY 2006 JEEP GRAND CHEROKEE
remove the 7mm bolt in the centre top of lamp unit then with a big screwdriver just behind headlamp prise outwards quite firmly
SOURCE: 1993 Jeep Grand Cherokee headlight assembly removal
Thairs 2 screws under head light and one on top corner of light.
95 views
Usually answered in minutes!
×