How do i replace head lamp bulb in a 06 sirion?

HEADLIGHTS NOT WORKING

It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.

==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----

All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

• Working of Headlight switch?
------------
• Both headlight bulbs blow together?

------------
• Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html

How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

how did you get on with this? i have the same problem..

Hello i can assist you open your hood behind the head lamp lenses is a head lamp bulb socket twist it counter clock wise then remove the socket and bulb unplug your old bulb replace with your new bulb and replace the socket back and clock wise tighten.Now turn your head lights on check both high beam and low.

Removal & Installation

1. Disconnect the negative battery terminal.
   

2. Remove the head lamp mounting bolts, then disconnect the lamp connectors.
   

3. Replace the head lamp bulb(A), position bulb(B) and turn signal bulbs(C).
   

   Head lamp bulb(A), position bulb(B) and turn signal bulbs(C)
   

4. To install, reverse removal procedure.
   

You either have a bad ground or the bad electrical connection at the light socket is "simulating" a bad ground. This is putting a high resistance on the bulb and it's taking it's toll by burning out the bulb. I would start with a new socket, and CHECK the ground. If you still have the issue, I would run another complete ground wire and not even worry about checking the ground itself. the Stick

1. Remove the jack screw attaching the top of the head lamp to the head lamp mounting module.
2. Grasp the upper inboard and lower outboard corners of the head lamp and pull the head lamp outward.
3. Remove the bad bulb socket from the head lamp module and remove bulb from socket.
4. Install new bulb into socket and reinstall socket into head lamp module.
5. Position the head lamp on the vehicle and align the ball studs with the sockets.
6. Push the head lamp inward to secure the ball studs with the sockets.
7. Install the jack screw attaching the top of head lamp to the head lamp mounting module.

Do not touch glass of halogen bulbs at the oil can cause the headlight to blow out

1. 
   

The whole head lamp assembly has to come out to replace the headlight bulb. Here's how to do it.
REMOVAL:

1. Remove the jack screw attaching the top of the head lamp to the head lamp mounting module.

2. Grasp the upper inboard and lower outboard corners of the head lamp and pull the head lamp outward.

1. Remove all of the bulb sockets from the head lamp module.
2. Separate the head lamp from the vehicle
3. INSTALLATION: CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
   
4. Install all of the bulb sockets in head lamp module.
5. Position the head lamp on the vehicle and align the ball studs with the sockets.
6. Push the head lamp inward to secure the ball studs with the sockets.
7. Install the jack screw attaching the top of head lamp to the head lamp mounting module

Open hood. Unplug wiring on back of head lamp. Pull off rubber boot on back of head lamp. Unlock clamp that holds light bulb in. Replace bulb. Clamp bulb down. Replace rubber boot. Plug in bulb.