Remove the center console, you will see the little orange tang which should be attached to the shifter, sometimes they come loose, re-attach it to the shifter and you are done.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
what does correctly mean. there are like 50 failing symptoms in the box.
a huge list. but common are.:
all gears 100% dead, PRNDL( R&D&L) all dead and act like Neutral
DRIVE acts like neutral or is Neutral shift linkages bad.
drive works in 1st gear but does not up-shift, at all.
drive works but 3 or 4th gear fail to happen.
in drive the tranny is locked into 2nd gear fixed. this is tranny limp home ,so scan the PCM/TCM for tranny errors.
in drive the 1>?2 up-shift goes to a false neutral (called flare) RPM goes why high
and lots and lots more, it is a complex device/system
the causes and tests posted here 1000 times.
endless it was. or 1billion times www., it seems
the so called ON CAR checks.
fuses all good
levels good, hot/idle, in park L>>>>X<<<<H (between L and H) never over or under. ATF dip stick gandering.
scan the PCM/TCM for tranny errors heck ANY ! and share them.
check shift linkage if tranny dead, the service manual even shows proving,each selection PRNDL works, even to the point of cant push car in park test. and can push in N. and more, in the book just this 1 test.
dip stick end looks like tar, or metal dust or smells burnt. (doomed)
and last the SM book shows the tranny pump port checks done at PRNDL
the side ports and a 300psi gauge tests, that must pass.
Tranny pan filter packed.
Tranny filter cracked and sucks air, oops
scans show shift solenoids failing, DTC errors. share them.
? 4:15
https://www.youtube.com/watch?v=-PQ-x11Vjng
Jan 24, 2012 - Uploaded by EricTehRedneck
Odometer/Gear Shifter (PRNDL) Display FIX - GMC/Chevy ...grease, it does in fact help insulate electrical connections but imnot sure lithium would help. .... i have a 2000 Chevy Astro van the park indicator goes out when you start ... volts but now the battery light stays on and the transmission will not shift ...
? 5:47
https://www.youtube.com/watch?v=jTQIVS_uB4g
Aug 11, 2010 - Uploaded by zcomputerwiz
Didn't light up anymore. ... Symptoms: PRND321 and Tripometer/Odometer no longer light. ... 2002 which the odometer and shift indicator do not work no more. ... But before taking the dash out I would like to know how to remove those .... Instrument cluster gear select blank screen solder fix Chevrolet GM ...
Fixed for 35.00.. same thing to my 2007 impala.. locked in park.. can't remove key.. dealer wanted more that 500.00 to repair when part is 35.00.. the wire in gear shift breaks.. second time for me with only 30.000 miles.. the part can be ordered or get at dealer..
Replace your Transmission Range Sensor (Also called "Neutral Safety Switch") It is located on top of the transmission housing under the shift lever where the shift cable hooks up.
You shifter indicator bulb (194 bulb number) has burned out. Pretty easy and cheap fix. The top of the indicator has to be removed/lifted up and teh bulb needs to be replaced.
×