Parkbrake light flashing on saying brake is on but it is not abs light is on 2 just done brake pads and discs
SOURCE: Jaguar, S-Type, 2004 will not accelerate after dash sign came on
one of tha abs and traction sensors has blown
SOURCE: I have a 2001 2.5 auto x-type jaguar and am
You discs might be warped check them and replac if needed.
Hope this helps.
SOURCE: What does it mean when ABS Fault and disc light on
it means you need to have it daignosed, you have a malfunction in the ABS brake system, could be anyone of a number of things, abs module, wheel sensors, etc...
SOURCE: excessive wear on 1997 s type jags rear brakes
The electronic parking brake on s type is prone to sticking and also needs to be calibrated correctly after pad changes. First check that the brake calipers are not jammed and the pads are fitted correctly and all parts are free to move. Then try a recalibration of the park brake. to do this - disconnect battery for 10 mins MAKE SURE YOU HAVE YOUR RADIO CODE as this will need to be entered when you reconnect battery.
Connect battery, put you foot on the brake pedal (not too hard) and then apply park brake switch. your message centre indication should go out.
If you have unexpected message ie. parkbrake fault - use this method to rectify it, as a low battery voltage often causes a parkbrake fault message to appear.
Hope this helps good luck
SOURCE: replaced back brake pads, but the abs light stays on
probbably a sensor is deffective or a snapped wire on the front where it moves about with the steering.
Have a nice day.
77 views
Usually answered in minutes!
×