How to remove the front parking light assembly from a 2006 GMC savanna

Probably a seal in reverse clutch or band . Would have to pull transmission an disassemble to fix .

shift solenoid is Inside transmissions pan

hope it helps

If you're lucky, you can access this by lifting the hood and looking at the back of the lamp assembly. Unless it's like my GMC and the light is in the bumper. Then you get to lay on the ground, look up, and you see the back of the socket. But you may be really unlucky in having such a new vehicle and the entire assembly has to be removed (if it's part of the headlamp assembly). A repair manual for your car, available at local auto parts stores, and for your make/model/year will lead you through the steps to do this.

On these website,s you find fuse box diagram, description, and location for GMC Savana (2006 - 2007)

GMC Savana 2006 2007 fuse box diagram CARKNOWLEDGE

GMC Savana 2006 2007 fuse box diagram Auto Genius

I had a gmc savanna 1500. Front brake torx was a t55. Just used a loaner brake tool kit from advance auto parts.

Read the owner manual

YOU HAVE TO REMOVE THE GRILL BEFORE YOU CAN REMOVE THE HEADLIGHT BUCKETS AND REPLACE THE LAMPS.

Removal & Installation
Bulb Replacement
To Remove:

CAUTION
Halogen bulbs contain pressurized gas.
Mishandling a bulb may result in the bulb shattering into flying glass
fragments.

CAUTION
Make sure to wear eye protection when
handling a halogen bulb.

CAUTION
Do not touch the glass of a halogen bulb,
only handle the bulb by the base.

CAUTION
Do not allow a halogen bulb to come into
contact with dirt or moisture.

CAUTION
Make sure to dispose of a used halogen bulb
properly.

CAUTION
Do not allow children to handle halogen
bulbs.

1. Turn the lamp switch to the off position.
   
2. Make sure the bulb is cool before changing.
   
3. Remove the headlamp assembly from the headlamp panel.
   
4. Remove the rear access cover from the headlamp assembly.
   
5. Disconnect the headlamp connector.
   
6. Remove the bulb from the headlamp assembly by rotating the bulb and socket
   counterclockwise.

To Install:

1. Connect the headlamp connector.
   
2. Install the bulb into the headlamp assembly by rotating the bulb and socket
   clockwise.
   
3. Install the rear access cover onto the headlamp assembly.
   
4. Install the headlamp assembly into the headlamp panel.

Headlamp Assembly
Chevrolet
To Remove:






Headlamp Assembly (Chevrolet)

1. Remove the grille from the front of the vehicle.
   
2. Release the headlamp assembly retaining tabs.
   
3. If equipped, disconnect the headlamp leveling motor connector.
   
4. Disconnect the headlamp connector.
   
5. Remove the park/turn and side marker bulb sockets from the headlamp
   assembly.
   
6. Remove the headlamp assembly from the headlamp panel.

To Install:

1. Place the headlamp assembly into the headlamp panel.
   
2. Install the park/turn and side marker bulb sockets into the headlamp
   assembly.
   
3. Connect the headlamp connector.
   
4. If equipped, connect the headlamp leveling motor connector.
   
5. Lock the headlamp assembly retaining tabs.
   
6. Install the grille onto the front of the vehicle.

GMC, Oldsmobile, Buick, Isuzu, and Saab
To Remove:






Headlamp Assembly (GMC, Saab, Oldsmobile, and Buick)

1. Release the headlamp assembly retaining tabs.
   
2. Disconnect the headlamp connector.
   
3. Remove the park/turn bulb socket from the headlamp assembly.
   
4. For GMC, Saab, Oldsmobile, and Isuzu vehicles, remove the side marker bulb
   socket from the headlamp assembly.
   
5. Remove the headlamp assembly from the headlamp panel.

To Install:

1. Place the headlamp assembly into the headlamp panel.
   
2. For GMC, Saab, Oldsmobile, and Isuzu vehicles, install the side marker bulb
   socket into the headlamp assembly.
   
3. Install the park/turn bulb socket into the headlamp assembly.
   
4. Connect the headlamp connector.
   
5. Lock the headlamp assembly retaining tabs.

when the hood is open look behind the light assembly the bulb is connected to the back just twinst off both sides sometimes you will need to remove the whole light assembly from the vehicle usually four bolts

pick up a chiltons or hanes rapair manual for your vehicle at your local partys store. most likely, you have to remove one bolt and swivel the caliper assembly upwards.