I have a pontiac montana sv6 2007 and im getting code p0522 oil pressure switch low voltage. i changed the oil pressure switch but i am still getting the same problem. and when i get to about 100 the oil light flashes and says low pressure
SOURCE: Looking To Recharge The AC in a 2002 Pontiac Montana
the low port is between the engine and the radiator support and the high pressure port is by the cruise controll module
SOURCE: change oil light will not go off after my oil change
Turn car off, then turn the key to ACC, pump the gas peddle 5 times. Turn off, then start car up that wil reset it and bring it back to 100%
SOURCE: low beam headlights not working on 2004 Pontiac Montana extended
You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.
I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp
SOURCE: how to reset change oil soon light 2005 pontiac montana
Turn key to the on position and press the gas pedal to the floor 3 times.then turn key back off then start it if it blinks at you 3 to 4 times real fast its reset..
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589
SOURCE: Check Engine Light on and flashing on Montana 2001
Most major Autoparts stores will get the Diagnostic codes from car computer and give you info on why light is on and what the problem is.
P0232....Fuel Pump Secondary Circuit High
P0230....Fuel Pump Primary Circuit
P0215....Engine Shutoff Solenoid
P0122....Throttle/Pedal Position Sensor/Switch A Circuit Low Input
P0522....Engine Oil Pressure Sensor/Switch Low Voltage
83 views
Usually answered in minutes!
×