1992 Cadillac DeVille Logo

Related Topics:

A
Anonymous Posted on Jun 11, 2014

Highbeams don't work

My low beams work fine. when i click the high beams nothing happens

5 Related Answers

Anonymous

  • 203 Answers
  • Posted on Nov 24, 2008

SOURCE: 2001 cad deville high beam only

probably the connections on the lever/arm .

Ad

Anonymous

  • 14 Answers
  • Posted on Mar 24, 2009

SOURCE: low beam head lights won't work

Check your relay switches under the hood fuse box. They should be a light grey from factory, they are about 1 x 1" in size and there are a few in there. Pull one out at a time and if they look brownish or yellowing replace. Go to Napa or Auto Zone for $15.99 a peice that most likely will fix it.

Anonymous

  • 155 Answers
  • Posted on Jun 11, 2009

SOURCE: 1998 cadillac deville high beam head lights only

Classic switch problem. Replace your switch and this will fix your problem.

Anonymous

  • 412 Answers
  • Posted on Apr 10, 2010

SOURCE: how do i fix high beam switch?

On this vehicle you need to pull the steering wheel upper and lower cover apart, then you can have access to replace your switch, please get back to me with any questions, thanks!!!

Anonymous

  • 61 Answers
  • Posted on Oct 28, 2012

SOURCE: left side low beam not working

if you have tester try test the wire or the bulb case, you will see why did not work, i think bulb wire is defective

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 2000 Chevy Impala LS high beams will not work. The low beams work fine but when I turn on my high beams, nothing

Check bulbs. had this happen on my intrigue had no high beams but lows worked. If bulbs are fine check fuses and relays.
0helpful
1answer

S10 1998 high beam problem

If I remember correctly, there is only one bulb on each side for the headlights. Is it possible that you actually have the highbeams set but the highbeam filament in the light is burned out so you're not actually using the highbeam?
1helpful
1answer

Only my highbeams work. Low beams are not working at all. All parking lights are working.

this could be the headlight dimmer switch not switching the power back to the low beam side of the the switch,when operating the dimmer switch do you hear a click that the switch will make when changing from low to high,it you don`t this indicteds a bad switch also.make sure the low beams haven`t burnt out also(it happens)this can be done by powering up the low beam filament and suppling a ground to the ground on the bulb itself(direct feeding of the bulb).if your not sure which filament you are checking out move the power wire to the other terminal and note the difference in brightness.
0helpful
1answer

High beam indicator stays on when turn on lights

Highbeam Symbol problem
The high beam and low beam works the opposite for my Mitsubshi Montero 1998, when in low beam the high beam SYMBOL comes on and when i flick to highbeam, the symbol comes off
1helpful
2answers

No headlights come on but high beams work as well as the other lights the fuses seem to be ok. Please help.

If your highbeams are working fine, you must be referring to your low beams not working I would simply check the 2 bulbs and make sure the low beam filament is good, theres a strong possibility that your BOTH low beam filaments are bad and require replacement of both headlight bulbs to get them working again its a very simple repair.....
0helpful
1answer

I have a 2005 Ford Freestar SE Minivan and cannot get high beam headlights to work. Have replaced bulbs, fuses are intact. When I switch to highbeams, the headlights go out completely. Low beams work...

AT FUSE TERMINAL #45 TO THE RIGHT OF THE HIGH BEAM RELAY AS YOU ARE LOOKING INTO THE ENGINE COMPARTMENT FROM THE FRONT OF THE VEHICLE. THERE IS A 15 AMP FUSE, PULL IT AND SEE IF IT IS BAD. IF IT IS REPLACE IT. THIS IS THE FUSE FOR THE HIGH BEAM RELAY.
2helpful
2answers

1992 lexus sc 400 headlights only work on highbeam flash position? could it be the switch

try checking the fuse first highbeam and dipped use different fuses.
0helpful
1answer

Highbeam cuts out but low beam works fine

May be a relay or bad light switch.Hope this helps
1helpful
1answer

My left headlight highbeam light works and the lowbeam don't why

the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.
0helpful
1answer

Highbeam Headlights not working

try replacing the fuse because low beam and high beam are two different systems
Not finding what you are looking for?

28 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...