When I show my mechanic (of course) it works fine! In advance thanks for your help.
SOURCE: 2000 accent clutch is soft
There is a bearing that presses on flat springs of the clutch plate and slides back and forth on a hollow tube when you press the pedal. These can get fouled with road crud and then hang now and then when you press the pedal and perhaps not fully disengage the clutch as it should producing either a stiff action or even worse, the gnashing of gear teeth. Some bell housings have inspection plates that can provide enough access to use some cleaner/lubricant on the hollow shaft on which the 'throwout' bearing must slide.
SOURCE: Hyundai accent high revving during gear change
you may have a problem with the idle sensor located near the fuel injection system.
SOURCE: i lost my third gear
It seems in the manual transmissions the first gear to go is 3rd gear..
signs of a failing trans
SOURCE: Gearbox fault of Jaguar S Type
hi,change the gear box solonied c.should b ok than ali g autos birmingham 07971335303
25 views
Usually answered in minutes!
×