Where is ecu located for 1997 corolla - 1997 Toyota Corolla

No, ECUs have to be exact.

Should be behind the glovebox or either in the passenger side kick panel.

The settings would be completely different - you will need the 1.8 ECU

Check out this video. good luck. http://www.youtube.com/watch?v=mQmpLjYryRw

Error Code P1300/ 14. Igniter signal malfunction No.1
Problem Areas:
IGNITION SIGNAL--NO "IGF" SIGNAL TO ECU
--IGNITER/IGNITER CIRCUIT
--IGNITER AND IGNITION COIL/CIRCUIT
--IGNITION AMPLIFIER/ DISTRIBUTOR.
--ECU

Hi Ian, I suggest you get it programmed by an agent. Regards John

You need to check pinout compatibility first and be able to recode the "new" ECU

Hello. Welcome to Fixya. Please allow is to assist you.

the "-84" in the part number indicates nothing more than the unit in question has been remanufactured.

All remanufactured parts from Toyota (starters, alternators, etc) all carry the "--84" suffix.

Thanks for choosing FixYa Today.

i know in some corolla models the ecu is under the centre console say under the sterio area,,if not then its either in the left or right side dash under glove box or kick pannels try both sides...

i have my c 220 4clys. diesel engie that i have problem on the wiring systerm on the window control modul that is located on the ecu. i have 3 wires disconect on the sucket of this modul. the wires are blue and white, yellow and white , black and white.
the second modul is that located on side of ecu carrying a black relais on.there is another 4 wires disconect from one surket side.the wires and their coleurs are green and lait red, tick red and green, red and yellow, black and red.
please i need a wiring diagram for this modul and unite.
my mail is [email protected]