SOURCE: 89 honda prelude power steering belt
there is an adjustment bolt on the back side of the idler pulley . you just loosen up the nut on the front of the pulley , then turn the 12 mm bolt under the pump on the back side of the pulley.
SOURCE: 1992 Honda Prelude Timing Belt Diagram
There's no such thing as a timing belt diagram.
Do you mean to say the "Procedure" for changing a timing belt in a 92 Prelude?
By asking such a question I can only interpret it as a clear indication that you've never changed a timing belt before.
If this is true, then you don't want to start out or practice on your own car.
Get the car to a pro and have the job done right.
If not true (and you've changed timing belt's in the past)
Then give me the engine size and I'll post the:
"PROCEDURE" for changing the belt in a few hours.
SOURCE: 1996 Honda Accord Timing Belt Installation. I need help.
You didn't post the size of motor so please use the one that is for you:
2.2L (F22A1) ENGINES
Install the timing belt, around the pulleys, in the sequence shown
SOURCE: need Serpentine Belt Diagrams for 2001 honda
you can access most items @autozone.com, they have free manuals online. you will need to register and provide info about your car, it is FREE! what I pulled up is courtesy of autozone.com, this is for the 01 passport 3.2 2wd vehicle. the manuals will provide step by step instructions you can print off, good luck!
SOURCE: My ABS light on my 1996 Honda Prelude is on. How
the light will only turn off when the ABS system fault that caused the module to turn the light on is repaired, to do this u need to have the dealer test the system for fault codes, most likely one of the four wheel speed sensors will be defective.
83 views
Usually answered in minutes!
×