Question about Cars & Trucks

1 Answer

Komatsu D65 bulldozer is stuck in forward. Soon as u crank it up ur going forward. U can turn left and right but won't stop or go in reverse. Its no the ppc valve I have already taken it apart and inspected it all springs and valves are fine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 20,706 Answers

This is a car and truck forum
not a dozer.
try correct forum sections, please.
all ways
and lots of facts and pit falls. Dont brick it fore ever guessing !!!

http://www.fixkick.com/power-elect/Keep-Alive/keep-alive.html

Posted on Jun 08, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
mcalkins3
  • 123 Answers

SOURCE: my car will not go in reverse but will go forward

typical FWD GM transmission issue, the transmisson will have to be rebuilt. You could try a fluid flush and filter change but there are only 2 discs pack for reverse. Which makes them fail very easily

Posted on Oct 17, 2008

jmeyer847
  • 204 Answers

SOURCE: No reverse movement after valve body was removed and cleaned

Stupid question here, but did you put the valve body in backwards or upside down? Ensure all the connectors, lines are good....outside of that how about the gear selector? I have done alot of tranny work myself, but some of these things are common mishaps that I have done myself. Good luck to you and let us know what you come up with. Thanks for using Fixya!

Sincerely,

JC

Posted on Dec 10, 2008

REDOIL
  • 355 Answers

SOURCE: 2000 vw passat 1.8lt 164 000 km,knocking noise on top end

YES IT IS IN THE VAVLE TRAIN COMIN IN MOST VW THE TIMING CHAIN ADJUSTER GOS BAD MOST OF THE TIME FROM LACK OF OILCHANGES AND OR CHEAP OILS ANY WAY NEED TO REPLACE GO TO REPAIR SHOP VERY HIGH TECH JOB

Posted on Aug 12, 2009

  • 1 Answer

SOURCE: Driver's seat unable to move forward or backward

There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.

Posted on Oct 02, 2009

  • 394 Answers

SOURCE: 2005 Kia Sorento - in

Hi,
Yes, this is normal while in four wheel drive on pavement.
I will try and explain why.
In four wheel drive the front and rear drive axles are linked together by a chain in the transfer case and gears in both axles. This is a direct link with very little play between the front and rear axles.
When cornering a rear wheel will spin faster, or slower depending on the direction of the turn. this causes a binding in the drive line because the drive line wants all the wheels to turn at the same speed. So the wheel "skipping" going in reverse, is the drive lines way of compensating for the different speed of the wheels turning.
Never should a four wheel drive be used on dry pavement. I could cause a break in one of the drive line components. On a slippery surface , snow, mud, gravel, grass, There is enough slippage in the surface to aloow the driveline to compensate for the different speeds of tire rotation.
So do not try at highway speeds on dry pavement.
Your four wheel drive system is working just fine.
Wayne

Posted on Jun 21, 2011

Testimonial: "Thank you!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I drive forward and stop put it in reverse and it cuts off


Check the fluid level.
How many miles on the truck?

May 05, 2016 | 1998 Chevrolet C1500

1 Answer

Need repair manual for Komatsu D20A,P,S,Q-6, D21A,P,S,Q-6 Dozer Bulldoze


Komatsu D20PL,PLL,AG-7,D20P,PG-7A,D21A,S,AG,QG-7,D21PG-7A Dozer Bulldozer Service Repair Manual
https://sellfy.com/p/DNUZ

Nov 23, 2015 | Cars & Trucks

2 Answers

Need repair manual for Komatsu D21A-8, D21P-8 Dozer Bulldozer


contact a service dealer spares department for the manual or cd
bet your life it won't be cheap but is probably the only place you will get one

Nov 23, 2015 | Cars & Trucks

1 Answer

Need repair manual for Komatsu D31EX-21,D31PX-21,D37EX-21,D37PX-21,D39EX-21,D39PX-21 Dozer Bulldozer


Downlaod Komatsu D31EX-21,D31PX-21,D37EX-21,D37PX-21,D39EX-21,D39PX-21 Dozer Bulldozer Service Repair Manual
https://sellfy.com/p/fmBE

Nov 23, 2015 | Cars & Trucks

1 Answer

My 2000 Sable won't move though gear selector appears to be in tack. Was making a left turn heard a loud pop on the right front side of the car then what appeared to be a rubbing or scraping noise...


the problem has to be in the linkage inside the transmission which means that you have to take into a mechanic to have them fix this because if you do not know how to take the transmission apart yourself is the reason why to take it to the nearest mechanic. Sorry

Jun 09, 2011 | 2000 Mercury Sable

1 Answer

I have a 2004 Chrysler Pacifica. When ever I make a left or right turn, either going forward or reverse, there is a cranking sound. It kinda sounds like a knocking sound.


dear friend-it might sound silly but when ever you make a ful lock turn to the left or right,it is like the body wants to break away from the suspention,it is normal wear and not easy to get rid off.

Sep 23, 2009 | 2004 Chrysler Pacifica

2 Answers

My car will not go in reverse but will go forward


typical FWD GM transmission issue, the transmisson will have to be rebuilt. You could try a fluid flush and filter change but there are only 2 discs pack for reverse. Which makes them fail very easily

Jul 06, 2008 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

21205 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...