I have 07 chrysler pacifica and the abs pump would not turn off with the engine off and no key can someone give me an idea what is wrong.

Also the brake light is on and the traction.

5 Related Answers

Anonymous

6784 Answers
Posted on Apr 21, 2009

SOURCE: 2006 Chrysler Pacifica touring abs light on stays on

Hi. this light is a warning that concerns the ABS sensor and mechanism assembly. there is a central module and connecting sensors that are attached to each axle/rotor. If any of the sensors become unstable or starts to malfunction, the main module will detect this anomaly and it will trip the light via, the ECM.

I recommend taking this vehicle in so that the ABS techs can diagnosis this issue and they can pin point which sensor or mechanism is malfunctioning.

You vehicle seems to operate in a normal manner at this point but, you will actually have to be in a hard braking situation in order to experience this malfunctions results. If you where to initiate a hard brake while the ABS system is in safe mode(light on), your vehicle would simply lock up. It would not provide the ABS actions due to this malfunction that is evident at this point.

Please rate and god bless:)

Anonymous

323 Answers
Posted on May 01, 2009

SOURCE: Check Engine Light

If the light isn't flashing, it is safe to drive. If it is flashing, then catalytic converter damage can result. Have a parts store check the codes for you and come back and post the code.

Anonymous

396 Answers
Posted on Jan 16, 2010

SOURCE: Engine light and ABS traction control light remain

The ABS sensor is a speed sensor also for Traction Control. This is why both lights are on , One of your front ABS sensors are bad or disconnected, or has a pinched wire.

Anonymous

1 Answer
Posted on Feb 16, 2010

SOURCE: 04 chrysler pacifica dashboard lights stay on & drains my battery

my dash lights stay on after i turn off my van, the fan stays on also the alarm does not work or the keyless entry does not work.

chargerhp

815 Answers
Posted on Dec 05, 2011

SOURCE: ABS light on a 2005 chrysler pacifica, ABS light

They are having problems with the ABS wheel sensors on these. They replaced mine under warranty

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

On my 2005 Chrysler pacifica whenever I come to a stop or put my brakes on fast it shutters then the fuses blows out and i only get first gear

Which fuse(s) blow?

Likely the shudder is ABS activating which in itself shouldn't cause fuses to blow. And a blown ABS fuse shouldn't affect the transmission. So I expect more than one fuse is blowing which would imply inappropriate connection between systems (short).

What are road conditions? If clear dry pavement then ABS should not be activating unless severve extreme braking. If snow and ice, then ABS will likely activate and shudder.

Likely there are stored OBD codes which would give direction.

When you replace fuses, try leaving out the ABS fuse. You won't have ABS (pump brakes if lockup) but if the problem abates you can still get around and have it serviced at your earliest convenience.

Read full answer

Feb 24, 2021 • 2005 Chrysler Pacifica

0helpful

1answer