SOURCE: Difficult to start again after warm up engine.
give the engine a minute or two to cool down before turning it off. This cool down period allows oil to circulate and cool down the bearings in the turbo. If you shut off the engine immediately after hard driving, the oil can gum up around the hot bearings and create problems down the road.
Hope this helps
Thanks for using Fixya
Have a nice day!
SOURCE: B16A SWAP NO VTEC,CHECK ENGINE LIGHT, IDLES @ 1900 RPM
Wiring faulty, sensor not connected or mismatch, the ECU will not operate normally until it get all required input from the various sensor.
SOURCE: troubleshoot honda 2.0 i-vtec check engine lights
If the car can still be started it could be related to items that needs cheeking up and routine in nature such as tune-ups, change oil etc. Try to remove the negative terminal of the battery to see if you can clear out the errors. If that does not work, you may need a scanner to pick up the error and accurately diagnose the problem.
SOURCE: 2002 Honda Accord vtec 2.3l has a check engine
1.1 o2s(ho2s)(s1) = eng
3.2 map circuit = high input eng
7.1 t p sensor(a) = voltage low eng
SOURCE: What is the valve tappet
Intake: 0.007-0.009 in. (0.18-0.22mm) Exhaust: 0.009-0.011 in. (0.23-0.27mm)
72 views
Usually answered in minutes!
×