Jeep will not crank it has no power to fuel pump
SOURCE: 1988 jeep wrangler no fuel
check your fuel pump relay and your ignition switch those numbers you gave for voltage are not right, please recheck that you have a ground and 12volts at the pump while cranking please rate -jeff
SOURCE: no injector pulse, no current to the injector
Check the pickup in the distributor as this is the cam sensor. The injectors run of the pulses created while the rotor is turning around. It should be a plastic disk located under the rotor button.
SOURCE: 2000 jeep wrangler just shut off changed fuel pump
check foe fuel pump presure at fuel rail,,,if u have fuel pump presure check all fuses with a test light not buy sight,,could be deceviving ,look at and check to see if fuel pump relay is working if no fuel presure i,if u have presure in fuel rail ,replace the cranck shaft sensor
SOURCE: 1990 Jeep YJ 6 cyc. Won't Start---No Spark From Coil
It would be great if you could find the Ignition Control Module!!! From my experience on my Jeep...90 YJ 4.2 liter carb. it does not have one...Computer controlled only...
SOURCE: 1993 jeep wrangler won't start. replaced crank
Did u check all the main fuses and relays under hood?
124 views
Usually answered in minutes!
×