SOURCE: 2006 Hyundai Sonata brake light problem
there is a tsb for the brake switch in 06 sonatas. it must be adjusted or replaced by dealership. is your check engine light on, if so its probably code p0504
SOURCE: headlights for 2006 hyundai sonata
Answer
1. Remove the dust cover from behind the bulb that needs replacement.
2. Unplug the bulb.
3. Taking note of the bulb orientation, unhook the bulb retaining clip from the tang that holds it in place.
4. Remove the bulb.
5. Install the new bulb in the same orientation and clip in place.
6. Reconnect the electrical connector to the bulb.
7. Reinstall the dust cover.
Alternatively, if the bulb is burned out and you have less than 60,000 miles, you should take the car to the dealer and let them do it for free for you.
SOURCE: how do you reset the check engine light on hyundai sonata?
Just disconnect your battery for a couple of minutes.
SOURCE: My 2006 Hyundai Sonata's brake lights are not working
try the brakelight switch, it is right near the pedal above the footpad
SOURCE: need a serpentine belt diagram for a 2006 Hyundai
go to http://www.onlinemechanical.net/serpentine-belt-diagrams.html you'll find the hyundia sonata diagram about halfway down the page
35 views
Usually answered in minutes!
×