Speed odomator govern, what is the process to remove the govern my car top out at 87mph

According to the government, it was unsafe at any speed.

easter egg hunt 1million
Car speed?
or ABS speed sensors. we cant guess, whats wrong, can we.?
USA car,? we are USA, cars not here are vastly different.
so........????????
why ask not telling problem? scans told you sensor is bad
post the DTC error. speedo dead.Odom, dead? what?
J20 engine ,
5 speed stick shift box. manual trans,,m/t
4wd or 2wd?
toss coin NOT ABS sensors.
there are 2 speed sensors ill do all 3 permutations of car
4wd one or tail of transfer case
2wd one on tail of 5speed box.
any, the backup speed sensor in the speedometer cluster
89-98 years and was deleted 1999, usa.

why ask ,tell why. so we can be on the same page and
not have to document all the above.

color is of on concern, only correct part numbers matter !!!

colour (non usa spelling) is my only real useful HINT.
never said speedometer fails. or odometer fails
the trans is manual so no speed sensor needed ever there to shift automatially,its a stick

scan it yet.?
THAT BE FIRST.

i looked at our 1999 usa GV . serv. man
best i can tell speedo has new electronic head.
no speedo cable. first year, in fact. (i owned a 97 and 04)

so when VSS goes dead (say)
the speedo goes dead
odom goes dead
and ECU sets DTC errors for VSS dead.
3 clear symptoms.
some cars have different VSS1 to match, axle gears.
the vss gear on end .

on newer cars with stick shift
like mine now
the aBS sends speed to PCM
so there is no transmission speeds sensors at all , 6sp, m/t
so lacking symptoms, me bollixed.

yes it controls the transmission shift points

run fault codes and check for TCM failure and speed sensor problems.

there is a ABS sensor on the rear differential that also works as a vehicle speed sensor. most likely tkis sensor is causing your concern.

most likely you need the cluster assembly,

the only way to get rid of the governor is to buy a performance tuner that is capable of shutting off the governor.

The speed sensor in the transmission is most likely the problem.

IS VERY POSSIBLE YOU HAVE A BAD CONNECTION ON BACK OF CLUSTER. REMOVE CLUSTER CLEAN AND APPLY ELECTRIC GREASE ON CONNECTOR PINS AND REINSTALL

It is very possible your computer is malfunctioning. It is best to have a diagnostic test done on this to pinpoint exact problem area.