- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 3:18
www.youtube.com/watch?v=mU0sgQn-0qw
Jun 19, 2015 - Uploaded by Justin Shiffler
PT Cruiser manual stick shift cable bushing tip ... how hard was this to replace? my right bushing is gone and ...
? 1:06
www.youtube.com/watch?v=MiHSkqSrsLY
May 8, 2013 - Uploaded by CJ Turner
Shifter cable broken for the third time ... Chrysler PT CruiserBrake Light Switch Replacement, Shifter Stuck .
shifter parts.
did you look at volvo dot com, the maker
and then click parts department.
then see the nice drawings?
which engine,? the AW71 tranny??????????
you can look for any part on car here.
Yes you most likely have a bad throw out bearing. If you replace the bearing you would do yourself a favor and replace the clutch and pressure plate while you are there.
the best thing you can do with that is take it to the dealer. I work on them all day long and it is very hard to replace the shifter bushings on an automatic. no only does the center console have to come out but you have to disconect the shifting linkage under the car as well. The bushings cost about 7-8 dollars apiece and it is like an 1.5 hour job to do so you might want to take it to your local dealer.
You will have to remove the center console and then the shifter asm. look down inside where the shifter goes and you will see 3 selectors one will be out of position. You will need to pop it back inline with the other 2. After that look at the bottom of the shifter ther should be a bushing on the very end, if it is not there you will need to get one from your dealer, they are like 8 dollars and then you just pop it on and reasemble in reverse order and you should not have any more trouble.
The lower shifter boot is attached to the transmission by 3 10mm bolts. You will need to remove to center consoule and the upper shift boot that attaches to the car to be able to remove the lower boot. Then you can replace the lower boot.
×