Need physical location in car
Each tire has a module and the receiving unit in the car typically under the dash. To reset it:
1. Park the vehicle in a safe place and turn the ignition switch to the "LOCK" position.
2. Adjust the pressure of all installed tires to the specified cold tire inflation pressure level.
3. Turn the ignition key to the "ON" position.
4. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times.
5. Leave the system with the ignition switch in "ON" position for a few minutes, and then turn the ignition key to the "LOCK" position.
SOURCE: Intermitting Tire pressure sensor light on dash
Make sure all tires are up to recommended pressure, including the spare, that also gets monitored, then per your owners manual follow the reset procedure and the lite should go out. Hope this helps.
SOURCE: low oil pressure 2002 toyota sequoia
maybe your engine need an oil service, or better oil quality , try to use an 10w-40 engine oil
SOURCE: need to disable tire pressure warning light. Air pressure normal
You cannot "disable" the TPWS. Also, when you replace sensors, they need to be programmed to the TPWS computer.
SOURCE: I need to know the pressure for Toyota Camry 1990
its on the tires 35 pounds
Testimonial: "Quik Response! Great service"
540 views
Usually answered in minutes!
×