How to replace 08 volvo v50 breather box? - 2008 Volvo V50

SOURCE: locate cabin air filter in volvo V50

It's under the dashboard. First you must dismount the accelerator pedal (!), remove some dashboard plastic on driver side. The filter is somewhere behind the central console.
I think it should be changed every two years. Look into the manual.
The company where you take the car for oil & filter change every year must change also this filter with no additional charges. Of course they charge you for the filter, which is not very exponsive.

SOURCE: INTERNAL BOOT COVER volvo v50

Find a crashed one near you and but the part. The way the cheapest solution.

SOURCE: 2008 Volvo V50 - Cabin Air Filter Location?

It's under the dashboard. First you must dismount the accelerator pedal (!), remove some dashboard plastic on driver side. The filter is somewhere behind the central console.
I think it should be changed every two years. Look into the manual.
The company where you take the car for oil & filter change every year must change also this filter with no additional charges. Of course they charge you for the filter, which is not very exponsive.

Colin Stickland

• 22516 Answers
• Posted on Oct 30, 2009

SOURCE: Volvo V50 LPG

yes all modern vehicles have stelite coated valves for unleaded so it will work ok

SOURCE: fuel filter location 08' volvo v50 1.8 petrol?

Removal & Installation

Print

NOTE The fuel filter is either on the left side of the firewall or next to the fuel pump near the left side of the fuel tank.

1. Before servicing the vehicle, refer to the Precautions section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket
   

1. Install or connect the following:
   
   Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
   
2. Start the engine and check for leaks.




Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models
Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket
   

1. Install or connect the following:
   
   Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
   
2. Start the engine and check for leaks.
   
   

   Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5 cylinder models
   Using an open end wrench to push the quick disconnect coupler sleeves back-5 cylinder models

1. Before servicing the vehicle, refer to the Precautions Section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket
   

1. Install or connect the following:
   
   Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
   
2. Start the engine and check for leaks.
   
   

   Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models
   Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models