SOURCE: 1990 toyota camry gas gauge quit working
Either fuel sensor is bad or coated with sulfur residue from inferior gas. Try a can of Sea Foam gas treatment OR can of Techuron concentrate. Both available at auto parts and , of course, Walmart ! Add to full gas tank, drive 75 - 100 miles and see if all is well. If not, condide4 sensor change
SOURCE: fuel warning light stays on despite full tank and
sounds like a bad gas meter unit in the gas tank if not working. I dont know toyota the tanks but my jeep the thing that read the level is hooked to the pump. Looks like metal arms with plastic arm that floats to tell the level in the gas tank
SOURCE: fuel guage stays on empty and low fuel light stays
You might have a leak in the float in the fuel tank sender unit (the float should sit on top of the fuel and feedback info to the gauge - the fuel gauge staying on empty might mean that the float is either leaking or it is stuck).
SOURCE: When pump gas into fuel tank gas keep cutting off
that would probably be the flap in there not fully opening and the fuel is splashing up onto the gas nozzle. You can change the angle of the nozzle or pump slower to give the fuel time to run down.
244 views
Usually answered in minutes!
×