I was drving yesterday, slowed down for speed bump, the car cut off, the VDC light slip light and service engine soon light came on.., why and how do i fix this?
Have a shop check for codes,diagnose them,component
test to find a problem & resolve it
I find it odd that we get these questions about vehicles
We have had check lights,codes & such since 1981,over
33 years & have been working on all vehicles the same during
that period & we all get a dash lights on our vehicles once year,
so this is nothing new
Basically if you don't work on vehicles, then the questions should
go to a the dealers & repair shops, that do
If you check for codes ,you can Google them & see the problems
There isn't much that is not on the internet already in print
SOURCE: replaced braked pads - now VDC and Slip Lights are on
I would take the car to almost any auto parts store and ask them to check the ODB II computer for codes and to reset the "Check engine light". Get the code that they tell you and it should go a long way to pointing you in the right direction to fixing this problem. It might also be that when you pumped the brakes that you somehow set a code in the computer from the ABS system and now that you have the brakes pumped up and working correctly resetting the Check engine light might fix your problem.
Good luck! Write back with any code you get and I'll see if I can help you figure out what the problem might be.
SOURCE: Why is the check engine, slip, and VDC light on
All three lights came on at the same time while I was driving last month. The dealer said it was the sensors. Had them replaced for about $750
SOURCE: i have infinity fx 35 2003 the service engine
You need to run a continuety test between the PCM and the sensor wire most likely a bad wire or the connection( if the Wire and connection is good its probably a bad pcm)
SOURCE: infinity g35 sedan slip, vdc lights
When ever you get these waring lights it means the computer control module has sensed a fault in the systems many parts or wiring, in order to begin the diagnostics to repair the fualt the system must be scanned for fault codes. this is the number 1 first thing that must bwe done.
207 views
Usually answered in minutes!
×