As tight as u can tighten by hand wrench then back off 1/4 turn then limit.
SOURCE: what torque for rear wheel bearing Ford Focus 2000
Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps
SOURCE: torque specs 7.5 inch rear axle 96 ford ranger
Differential bearing caps 70-85 ft lb
Ring gear bolts 70-85 ft lb
Pinion bearing preload if using original bearings 8-14 lb-in, if installing new bearings 16-28 lb-in
SOURCE: 1986 ford f150 front axle
I believe its 50 ft/lbs for the nut and the lock nut. If you're talking about a 4x4, if it's a 2wd and you mean the spindle nut, then I'll have to get back to you. Cheers.
SOURCE: main and rod bearing torque specs
do you have a Haynes Manual or Chilton? if not check your local library, they may have one, the specs are in there
SOURCE: what is the torque specs for the front wheel
Ford Front wheel bearings do have a torque spec. It is all over the new part to torque to MFR spec or damage will occur.
I have no idea what that spec is though.
1,523 views
Usually answered in minutes!
×