SOURCE: I BROUGHT A AUDI 2000 A6 4.2 SAFE RADIO
Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.
SOURCE: AUdi A6 gas tank button
There is no button to open the gas door from the inside of the car. As long as the doors are unlocked, you should be able to push in the far right side of the gas door and the left side will pop open. I too spent hours looking for this non existent button..I went as far as to going back to the car dealership.
SOURCE: AUDI A6 RADIO CODE
try another dealer. maybe try to get ahold of one of the techs at lunch time. this info should be free to the car owner, just be ready to supply the title to the car for some proof. maybe try buying the parts guys lunch or coffee and donuts....this usually works for this type of problem. unfortunaley this info really is dealer only..
SOURCE: audi a6 4.2 have trouble with reverse
what kind of trouble? if it won't go into reverse the trans is defective and will need an overhaul
SOURCE: Audi A6 RPM Signal from ECU
dont think you are reading the codes right because PO in front of the code is not a genuine Audi code ,well not according to my information ,try autozone who issue these codes or a snap on code reader booklet
64 views
Usually answered in minutes!
×