S420 How I remove my front bumper for 1995 Mercedes s420.

so 2 posts 1st one is useless,
MBZ ,firing order.
so google it using real words.

like this
Mercedes-Benz S420 firing order 1995 example

https://search.brave.com/images?q=Mercedes-Benz%20S420%20firing%20order%201995


or buy the service manual and read it;. on any car.

https://www.cargurus.com/Cars/Discussion-t19836_ds557958
https://www.repairsurge.com/Mercedes-Benz/S420/repair-manual-online
https://www.scribd.com/document/57487652/1995-S320-S420-S500-Owner-s-Manual-Edition-C-unlocked#
https://www.rockauto.com/en/catalog/mercedes-benz,1995,s420,4.2l+v8,1195747,literature,repair+manual,10335

this should help, on the sides you have the piston #, and at front you got the firing order

faulty oil level sensor or wiring for oil level sensor, it's fitted at underneath the oil pan near the drain plug it's mounted to the oil pan by three bolt if you going to remove it you must drain engine oil first before remove the sensor, is this information helped you?

I would start with checking the distributor caps and rotors. Those components can cause intermittent engine running problems like that. They are located right in front underneath the black covers by the intake air tubes.

Under the front of the car on the engine compartment should be nuts that you can remove to remove the cover.

Spin the barrel fuses as corrosion can stop them from working.

hello,good day,first try to check your blower switch,if not corrected,your blower resistor is located at the bottom of your brake booster,ty

it is locates on the left side of the engine block by the distributor cap,if ur car engine is the 119.971 .140 body style

The bumper is secured using four 13mm nuts.

a) Open the bonnet and look for one 13mm nut on the lower inside of each headlight.
b) Remove the towing eye covers on the lower section of the bumper and you will find one 13mm nut in each.

Hope this helps.
Shane