Having codes read is a waste of time, if you don't understand
or work on vehicles
You need a shop to properly diagnose it,you know that
Any codes can be Googled to look them up
Type: OBD & the code
Codes have little to do with replacing parts
No parts get replaced until they are tested & fail a test
SOURCE: my car wont start my mechanic put it on machine
ok now for starters, we will go with the most probable:P0341 crank position sensor. chances are it needs to be replaced. 2nd your check engine light has probably been on for a while right?! the P0133 is an o2 sensor code and would probably be good maintenance(but get it to run first. 3rd P1599 refers to it stalling out which if it died while running would most likely trigger this. and last but not least either your coolant level switch is faulty or you really do have low coolant. let me know.
SOURCE: how to reset computer on
the 02 sensor----camshaft position sensor and evaporative emmisions has small leak----the 2 sensors are dirty or wornout------emisions tank near gas tank shud be inspected-----ull get better gas miles when fixed----------codes will not disapear until then
167 views
Usually answered in minutes!
×