1999 Lexus ES 300 Logo

Related Topics:

A
Anonymous Posted on May 19, 2014

Do i need both catalytic converters on my 2000 lexus es300

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Mar 27, 2009

SOURCE: how to change lexus es300 2002 cabin air filter

I just changed the cabin filter of my ES300. I found the instructions on the manual, under airconditioning and audio. It's pretty easy to do. I bought the filter from Kragen's for $21.95.

Ad

Anonymous

  • 39 Answers
  • Posted on Apr 23, 2009

SOURCE: 2000 lexus es300 error code p0440, p0441, p0446

P0440 Evaporative Emission System, P0441 Evaporative Emission System Incorrect Purge Flow , AND P0446 Evaporative Emission System Vent Control Circuit

Anonymous

  • 18 Answers
  • Posted on Jul 22, 2009

SOURCE: Radio removal 200 Lexus ES300

First you need to remove th wooden bezel surrounding the shifter. Do this by gently prying up the bottom part of the wood closest to the cup holders in the armrest using a small screwdriver. Then work out te top part gently. Rotate/angle the wood bezel to get it over the shifter. It will slide past, just work it around the button. Once this is removed then you need to remove the ashtray below the climate control. Now that the shifter bezel has been removed locate the 2 screws securing the bottom of the ashtray housing and remove them. The ashtray then will only be held in be retaining clips at the top. Once the screws are removed you'll want to have the ashtray open to get better leverage on it to pull. Gently slide the ashtray out. Be careful not to pull to hard on the actual tray of the ashtray. there is a plastic tab in the back of the ashtray that can't be seen that prevents it from coming out all the way that can easily be broken. If you do break it the ashtray is still secured to the swing mechanism by 2 screws in the bottom of the tray that will still allow it to be functional and secure, so don't worry. After the ashtray is removed the next step is to remove the small trim piece directly underneath the climate controls. On 2000 and 2001 models this will be made of wood. 97-99 models it will be black plastic. Using a small flathead screwdriver gently pry the strip of wood or plastic out. Starting in the middle of the strip is best, the retaining clips are on the right and left of the strip. It should pop out fairly easily.This will expose the screws holding in the bottom of the climate control which will need to be removed. Once the climate controls are removed the bottom radio screws should be visible. Next for the screws retaining the top of the radio you'll need to remove the clock/airvents located above the radio. Remove this with a small flathead screwdriver using the pop out method. Once removed this will expose the screws retaining the top fo the radio. Remove these screws and the screws at the bottom and the radio should slide out. Again, this will work on all models from 97-2001.

Anonymous

  • 6 Answers
  • Posted on Jul 24, 2009

SOURCE: amplifier location 1993 lexus es300

My Son has a 95 es300, the amp for it is located under the front passenger seat. The easiest way to access it is to remove the 4 bolts holding the seat down, and remove the seat. Takes about 5 minutes

Anonymous

  • 672 Answers
  • Posted on Mar 29, 2010

SOURCE: LEXUS es300 oil light stays on oil level full

Check oil level sensor, replace if necessary. also, does your engine knock or make a tapping sound?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

2002 Lexus ES300 Bank 1, Sensor 1

Bank one should be the side next to the firewall, and sensor one is before the catalytic converter.
0helpful
1answer

My 1993 Lexus ES300 it's not passing smog because

It might be a worn out catalytic converter if you have no fault codes.
3helpful
2answers

Code p0420 on 97 lexus es300

P0420 is catalyst below threshold. It is triggered via the rear o2 sensor (post cat), so you may want to check that sensor to make sure it's functioning properly.
1helpful
2answers

When I start my 2003 ES300 smoke comes out the exhaust

The same thing happened to my 2003 ES300 - the smoke is coming from the oil seeping into the motor's cylinders. This is the classic "Oil Gelling" problem in Toyota and Lexus vehicles. There is a factory recall on it, but it only covers to 2002 ES300 not 2003. The Lexus dealer confirmed my "oil gel" problem and went to bat for me with Lexus - they got the repair approved - Thank you Mr Local Lexus Dealer! The cost was nearly $4,000 - paid for by Lexus.
0helpful
2answers

Were is the oxegen censor on a 1995 es300 lexus

For 1995 Lexus ES300 3.0L MFI DOHC 6cyl the Oxygen Sensor is located under hood, center, rear engine area, above exhaust pipe flange, mounted in exhaust manifold

Application: Number one

Hope help (remember rated this).
0helpful
2answers

SHAKE OBSERVANT FOR LEXUS ES300 DAMAGE

The control arms go out constantly .
The repair is very long. I would take the vehicle in for repairs to lexus.
0helpful
1answer

I have a 99 lexus ES300 and when I press on the gas it doesn't act like it wants to go. When It finally does go it sounds like a plastic bag is in the exhust. We have replaced the O2 sensor and the Mass...

ur catalytic converter maybe. loose exaust. i had a strange exaust noise that turnd out to be the metal shield that covers the converter was hanging. same car and year i use premium and mine wants to go.
Not finding what you are looking for?

47 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...