Removing fuel line quick connect 0n a hyndai accent

SOURCE: how do I unjam a rear passenger seat belt from a hyndai accent 2000

i strongly recommend you take your vehicle to your vehicle's local dealer and have the belt removed from the door and then inspect the belt for damage. A damaged seat belt might break when you need it most. Seatbelts and safety are the most important thing!

Happy to help
Have a nice day!
tc

Harvey N Tawatao

• 3854 Answers
• Posted on Jul 12, 2009

SOURCE: where is the fuel filter located in 2000 hyndai

The fuel filter is located under the rear seat.

1. Reduce the internal pressure of the fuel lines and hoses by completing the following operations:
   
   • After removing the rear seat cushion, disconnect the fuel pump harness.
   • Start the engine. Allow it to stop by itself, then turn the ignition switch OFF .
   • Disconnect the battery negative (-) terminal.
   • Connect the fuel pump harness connector.
   
   
2. Remove the eye bolts while holding the fuel filter nuts securely.
3. Caution: Cover the fuel filter with a shop towel to avoid residual gasoline from splashing.
4. Remove the fuel filter mounting bolts, then remove the fuel filter from the fuel filter clamp.
5. After replacing the fuel filter, check for fuel leaks.

SOURCE: removing original fuel filter on 96 grand am

if original, don't worry about the black cap and tabs on the non-threaded end of the filter connection. Unfortunately, you have to literally pull the heck out of it to separate it from this connection. What is holding it in is a metal "barbed" collared sleeve inside the connection. Try using a pliers on the cable side (don't bend or break!) and work the filter off using elbow grease. Not fun, but it worked. The FRAM replacement filter simply snapped right in.

SOURCE: 2002 Hyndai Accent occassionally will not start

check your starter sometimes the solenoid gets stuck if this is the case you will need to replace the starter.