Most radois since 2000 have security systems built into them. If you swap same make vehicles it will plug in, but my not work. You get a lock code on the radio. It can be unlocked at a dealership. You have a 1 in a 1000 chance it make be OK. I've done it, but it was just lucky it worked.
Yes
SOURCE: help
I'm having the same problem. I get an error message for the first cd, but will play ever other cd.
SOURCE: jbl radio in toyota sequoia
If I unplug all the wires from the CD player won't the security system lock up my stereo system? Which means that I have to go to a dealer to get the code from them.
SOURCE: 2006 toyota camry JBL radio; controls don't work
THIS IS A RADIO PROBLEM, THIS PROBLEM WILL REQUIRE THE RADIO BEING SENT OUT TO AN AUTHORIZED FACTORY ELECTRONICS REPAIR CENTER, THERE IS NO BLOWN FUSE OR THE RADIO WOULD NOT EVEN TURN ON.
SOURCE: 2003 toyota sequoia radio error code 1.will not
Error one indicates a bad laser pickup, or a calibration issue. I would recommend a CD cleaner, but, if that does not help, the radio will need to be taken to an authorized service center. The 01 code is rather common to those radios.
SOURCE: How to remove audio system 6 disc JBL system in Toyota Rav4 2006
remove the cover in the center of the dash and there will be approx. 8 10mm bolts holding it take them out and undo the wiring harnesses in the back, you may also have to take out the temp controls underneath the radio, depends on the model
Testimonial: "I went out on utube and found a video for removing this very system. Thank you very much for replying, it would be important to share that you should have a magnet extension to pull the screws out as not to lose them. You need a special tool to remove the cover, a phillips head, an ext magnet, and a 10mm socket. Thanks again for replying and for helping others with their questions. Great Job."
130 views
Usually answered in minutes!
×