SOURCE: vw polo car wont start
try disconecting the coolant temp sensor and then try, it may be faulty, also check the hall sender unit in the distributor, if it has one, the centre pin should be the signal wire if no pulse is present the sensor is faulty
SOURCE: n reg vw polo engine cuts out at junctions when headlights are on
first clean throttle body out with carb cleaner and some clean cloth , if the throttle flap is dirty the car will stall
SOURCE: MY VW POLO SHOWS FAULT CODE ; P0106 ABSOLUTE MANIFOLD PRESSURE SE
this a map sensor, probably just need the sensor replaced, it measurese intake vaccum and adjusts air/fuel mixture accordingly
Testimonial: "MANY THANKS TO HONDABOY 47. SPOT - ON. PROBLEM SOLVED!"
SOURCE: 1999 1.4cl auto VW Polo, windscreen wipers stopped working
Look into changing the ignition switch...sounds odd I know, but we had similar issue and that was the problem.
Good luck!
664 views
Usually answered in minutes!
×