SOURCE: 1989 cavalier z24
I just fixed my car, it was the spark plug wires leading to the wrong plugs, it runs like a champ now. Just did my first burn-out! :)
SOURCE: 98 chevy camaro wont start how do you reset fuel pump regulator ran out of gas
BLEED INJECTOR SYSTEM NOT GETTING FUEL TO ENGINE TOP.
SOURCE: 1988 Chevy S10 Durango Pickup, Won't start will fire
sounds like ignition module inside of distributor cap under distributor rotor button.these do go bad and can easily be replaced.strong suspicion from your details that this is the culprit.
SOURCE: 1988 chevy s10 blazer 4.3, cut out , will srart but will not stay
Your vehicle as an ignition control module located on top of the distributor (under the cap and rotor) I would pull the ICM and take it to NAPA and have it tested if bad replace it (cost about $80). Sounds like a ICM problem or it could be the ignition switch located on the steering coloum which can't be tested but costs $20. Hope this works
255 views
Usually answered in minutes!
×