Dead cranks no start keeps blowing asd fuse the second crank engine,can i pull whole harness out and inspect repair?
I would unplug the injectors, ign coil Alternator field, and heated o2 sensors and crank it. It will not start but see if the fuse blows. If no then one of the items you unplugged is the short. If it blew the harness has a short.
Google this asd problem, there is a lot of information on this problem. I would look for a short but would not want to remove the complete harness.. If you do this take pictures of the harness and all connections before you start.
SOURCE: no turn no start. blows the start fuel fuse intermitantly.
experience says the starter is the likely culprit....it has a bad spot in it
SOURCE: chrysler wont start
Sounds like a short maybe. maybe the wire completely broke? if you know a technician, see if the fuel pump is even getting power when key is on
SOURCE: my sons 1996 chrysler cirrus 2.5l v6 engine will
a starter that is bad is bad and no way to jump it this way
the solenoid pushes the drive gear out to the flywheel to crank the engine you see
SOURCE: 2001 pt cruiser wont start after changing the cam
l like keepin it simple and say check all grounds clean n tight and engine fuse box is dry and clean.
557 views
Usually answered in minutes!
×