2010 chevy express 2500 passenger turn and brake not working

SOURCE: pulsating and vibrating brakes on 2003 chevy express, new pads and rotors

Rust build up is commonly found on the hubs sandwiched by the rotors/hubs

SOURCE: I have A 2000 Chevy 3500 Express Van and the brake

Hi,

When you said that you checked the brake switch, did you check it live? Meaning verified live power to the switch, press switch, and then power came out the other terminal?

If so, also verify zero power on brake press, at the offending brake light bulb terminal. You must verify the test light each time you move it...leave running lights on...

After verifying that there is no power coming, after the brake is pressed, note the wire color and find it where it comes to the steering column and test there... This would eliminate wires and connections between front and the rear of the vehicle, unlikely, but needs to be tested.

After verifying no power at that terminal, then yes the t/s switch is certainly suspece. This may be the time to get a mechanic to verify and replace the switch, there are locks, tilt mechanisms, air bags, column bearings, etc involved. Failures risk loss of vehicle control (locking or binding for example.)..

Hope this gets you going in the right direction.

Testimonial: "Thank You. I tried those things and it seemed to be the Emergency Flasher switch in the multi function switch."

SOURCE: 2004 chevy 3500 express passenger van transmission

if ur replacing it remove front grill disconnect both lines and carefully remove retaining clips from radiator if replacement is original eguipt mount & reconnect --if its a universal follow instructions usually cut off fittings and use clamps and hose to hook up

SOURCE: Chevy express 1500 can 2500 coil springs fit or the leave spri

yes they will fit. be careful use all the suspension parts, life springs coils a-arms upper lowers its a all day projected get a coil spring compresser

Testimonial: "Thanks for the info "

SOURCE: how to replace brake light in 2008 chevy express cargo van

Yes, the snaps are hard to remove. I would suggest that once you get the old snaps out, go to an automotive store (Pep-Boys) and find a different style snap, to make it easier the next time the bulb needs to be replaced.