Outback wagon
SOURCE: Legacy wagon tail light replacement
The one thing youll find with subaru's is that they like to put nuts in funny places that are hard to access. There are either 3 or 4 nuts holding the tail-light assembly in place, which means youll need to take out most of the inner panels to access the others. You should not need a sealant unless the rubber seal is done for or there is water inside the car. Hope this helps
SOURCE: 97 subaru impreza outback awd gas tank leak
Drive it till there's not a drop of gas left in it for ease of removal.
SOURCE: My 1999 subaru parking lights will not turn off
the rocker switch on top of your steering column is on.
SOURCE: I have a 1999 Subaru Outback Impreza Sport. The
If you have any of the large chain auto parts stores in your area, call them and ask if they do free scans; most do.
If Subaru has maintained the same procedures for a while, and you have checked fluids, etc., you can try resetting the light via the ignition switch:
-Turn on the ignition (don't start)
- switch it rapidly between the 'ignition on' and 'ignition off' positions three times.
If the error has cleared itself (not uncommon), the check light will reset. If the problem is still present, it will either stay or come back on.
Our Su has done this a couple of times and with the scanner we have on hand, there was never any particular repeated problem.
Just a computer glitch/hiccough -
58 views
Usually answered in minutes!
×