Fitting jaguar s type door check strap - 2000 Jaguar S-Type

Need to strip out the door panel and separate the window from the regulator, usually just a clip holds the glass to the regulator arm, and to them lower regulator so can remove window, probably need a but of wiggling around, fitting is just a reverse

the s type and x type v6 petrol engines are basicly the same so i dont see any reason that they should not interchangable,

unbolt the fuel pump. unbolt the straps/ bolts holding the tank in place

try these http://www.onlinefreeebooks.net/autos/car/jaguar-s-type-s307-07-harsh-slow-shifts-30-l-v6-vehicles-reprogram-pcm-pdf.htmlhttp://www.tsbdata.com/tsb/2000-jaguar-s-type-v6-3_0l.html

"door strap"(also door restraint strap)depends on country...

I have the same problem I was inform by my jaguar dealer that it was the egr valve costs about £63.00 plus fitting

You have 2 lines coming out of the compressor, one big, one little, the big one, has a fitting up on the fire wall or up front, they are all different, but it should have a letter L on it, that is the low pressure side, also, the only fitting that the filler will fit on. Your max pressure should read, 45? I think. and it will stop cooling at 30. So you have a small window there to work in. Any other problems, I don't know that much about, like high pressure and compressor stuff. But, check it out.

Check the Lock Module for the door , as it is electrical and will do that if not working

take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.