At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The camshaft position sensor on a Peugeot 3008 can be located in different positions depending on the engine model and year of manufacture. Here are the possible locations:
On the engine cylinder head: In some Peugeot 3008 models, the camshaft position sensor is mounted on the engine cylinder head, near the camshaft.
Near the timing belt cover: In some other models, the camshaft position sensor is located near the timing belt cover. It can be either on the engine block or on the cylinder head.
Behind the camshaft pulley: In some Peugeot 3008 models, the camshaft position sensor is located behind the camshaft pulley.
To locate the camshaft position sensor on your specific Peugeot 3008 model, you should consult your owner's manual or a repair manual for your vehicle. Alternatively, you can seek the assistance of a professional mechanic or a Peugeot dealer.
Location of CHT sensor. It is located at the back of the passenger side cylinder head close to where the intake manifold and head meet.It will have a YE/LG and GY/RD wires to it.
he Engine Coolant Temperature Sensor is located in the coolant pipe, below the air intake pipe and behind the right cylinder head and is integral with the ECT sensor. The Engine Coolant Temperature Sensor is located on the back of the right cylinder head and is integral with the ECT sensor.
Clean the cylinder gasket surfaces on the engine block.
Inspect the dowel pins (cylinder head locator) for proper installation.
Clean the cylinder head gasket surfaces on the cylinder head.
Place the NEW cylinder head gasket in position over the dowel pins (cylinder head locator).The cylinder head gasket is not directional and may be installed using either side facing the engine block.
Install the cylinder head to the engine block. Guide the cylinder head carefully into place over the dowel pins and the cylinder head gasket.
Install the cylinder head bolts.
Tighten the bolts in the sequence shown in the image below on the first pass to 30 [n-m] (22 lb ft).
Use a torque angle meter in order to tighten the cylinder head bolts in sequence on the final pass. Tighten:
Tighten the long bolts (1, 2, 5, 6, 9, 10, and 13) on the final pass in sequence to 75 degrees.
Tighten the medium bolts (14 and 17) on the final pass in sequence to 65 degrees.
Tighten the short bolts (3, 4, 7, 8, 11, 12, 15, and 16) on the final pass in sequence to 55 degrees.
Measure the NEW spark plugs for the proper gap.Adjust the spark plug gap if necessary.
Specification:
Spark plug gap to 1.52 mm (0.060 in)
Install the NEW spark plugs. Tighten:
Tighten the spark plugs for a USED cylinder head to 15 [n-m] (11 lb ft).
Tighten the spark plugs for the initial installation of a NEW cylinder head to 30 [n-m] (22 lb ft).
If reusing the engine coolant temperature (ECT) gauge sensor, apply sealant GM P/N 12346004 to the threads of the ECT gauge sensor.
Install the ECT gauge sensor.Tighten:
Tighten the ECT gauge sensor to 20 [n-m] (15 lb ft).
THE 2.4L ENGINE CMP SENSOR LOCATED REAR OF THE ENGINE CYLINDER HEAD. FOR THE 3.5L ENGINE CMP SENSOR LOCATED BEHIND TOP OF TIMING COVER IN FRONT OF THE INTAKE MANIFOLD. FOR THE 3.6L ENGINE HAS 4 CMP SENSORS LOCATED TWO ON EACH CYLINDER HEAD. FOR THE 3.9L ENGINE CMP SENSOR LOCATED IS LOCATED ON THE FRONT OF THE ENGINE ABOVE THE CRANKSHAFT PULLEY BELOW THE POWER STEERING PUMP PULLEY.
×