Question about 2007 Suzuki Forenza Sedan
Serpentine belt diagram
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
That's easy, there are some pulleys with ridges to grip the underside of the belt, and some are smooth for the top side of the belt.
I can only assume your belt broke and fell off so you couldn't see how it was on prior. But either way you have limited length, and the last place you would be routing the belt is the tensioner, which you should have located first, so you can have a wrench handy to fit it.
Here's what you have:
Top left= alternator (small ridged)
top right = power steering (large ridged)
Bottom right = AC compressor (large ridged)
Bottom middle = Crank Pulley (large ridged)
In middle next to Power steering = Tensioner (small shiny smooth)
Remove the air cleaner housing (two bolts)
Start on left top side and loop belt (clockwise) across the alternator to the power steering down to AC (also clockwise from right to left) then over to crank pulley (from bottom clockwise around to top of pulley) to tensioner (smooth, belt is backwards on it) which will go back up to the alternator.
At the top middle there should be a sensor protruding from the timing cover that the belt passes under as it connects between the alternator and the power steering. And you won't easily be able to fit anything besides a box-end wrench on the tensioner, so you may need some kind of extension on the wrench to get good torque on it without hurting yourself.
Posted on Oct 28, 2009
SOURCE: How do you change a
Hi, raise vehicle, support with safety latches/jackstands, remove splash guard from passenger front wheel well. Using a box-end 15mm wrench release tension from automatic tensioner. Noting belt routing, remove serpentine belt, replace with new one, reinstall splash guard.
Posted on Sep 01, 2010
Tips for a great answer:
Aug 17, 2016 | 2004 Ford Taurus
May 22, 2016 | 2011 Dodge Ram 2500
Dec 28, 2015 | 1999 Oldsmobile Cutlass
Dec 21, 2015 | Ford Cars & Trucks
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models?
Click the link below: ----
----------This will help. Thanks.
Feb 02, 2012 | 2003 Toyota RAV4
Sep 21, 2011 | 2003 Chevrolet Impala
Oct 26, 2009 | 2002 Cadillac Escalade Ext
Aug 15, 2009 | 1994 Buick LeSabre
Jun 27, 2008 | 1993 Dodge Caravan
163 people viewed this question
Usually answered in minutes!