SOURCE: crankshaft position sensor location
if u pull the battery and battery tray u can easily reach this
SOURCE: po740 and po700
P0700 Transmission Control System Malfunction P0740 Torque Converter Clutch Circuit Malfunction. Have a nice day
SOURCE: self diagnostic test codes
anytime you do the self-diagnostic you will almost always get those 2 codes.
12 - direct power input to the PCM has been disconnected within the last 50 key-on cycles
55 - End of error messages
SOURCE: i have a 96 mistubishi eclipse with 2.0 non turbo
Tests/Procedures:
1. Check the Crankshaft Position Sensor (CKP) and Camshaft Position Sensor (CMP) signals with a lab scope.
2. Check the wiring and connections at the CKP and CMP sensor.
Potential Causes:
Camshaft Position Sensor (CMP)
Crankshaft Position Sensor (CKP)
Powertrain Control Module (PCM)
Wiring
SOURCE: need the vacuum hose diagram for a 1998 mitsubishi eclipse
http://www.dsmtuners.com/forums/attachments/420a-bolt-tech/89827d1228187918-resolved-need-vacuum-line-help-fast-420aturbovac-boostlinesstock.jpg
hope this helps
173 views
Usually answered in minutes!
×