Chevy S10, horn honks when steering is turning left or right

SOURCE: Broken Horn won't *******- 2003 Chevrolet Malibu

Hi. If your airbag has not deployed, you don't have to replace it. The airbag may have to be removed to get at the horn circuit. Try taking it to an independent auto repair place. I'll be willing to bet that they'll give you a better price for the repair. Good luck! ricardok45

Ed Warden

• 218 Answers
• Posted on Mar 10, 2009

SOURCE: 2003 Chevy Venture - Horn has started randomly

Chances are you have a faulty clock spring in the steering wheel, you will most likely need to have it replaced.

Marvin

• 85242 Answers
• Posted on Mar 23, 2009

SOURCE: Horn not grounded?

the clicking noise is the horn relay, this means in most cases the horn is defective and should be replaced.

SOURCE: 1992 chevy s10 no brake lights or turn signals

Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

SOURCE: 2000 Tahoe Horn broken

You can remove the horn relay and use a Ohm meter and check the resistance between the horn relay connector terminal No. 86 (Black Wire) and ground. If the ohms are less then 5 ohms replace the horn relay. There are a lot more tests but as Polarcycle states you can do what he suggested other then I believe you have two horns in this vehicle.