I reached through an open window to unlock the door and set off the alarm, how can i reset the alarm without the keyless entry flipper
SOURCE: The driver's door doesn't lock
First thing is to try passenger door (that still has key lock for '03,
doesn't it?) Or the rear hatch. I'll bet it won't work there, either,
unless battery is disconnected. My guess is that the remote locking is
staying at "lock" - which is why it works with battery disconnected.
I haven't heard of anything just like your problem, but there have been
many who have to replace the RKEM (Remote Keyless Entry Module) - it's
behind the radio. Usually the doors start to lock & unlock by
themselves.
SOURCE: Intall Remote Keyless Entry System in an 02 Honda Accord
You got the Wrong Information! Go to Wal Mart and Purchase a "Bulldog Security Keyless Entry" System for your Car. It will cost you a Quarter of the Price and is Just asw Reliable as the Factory Unit! Got one on My Truck with Remote Start also and it works GREAT! Should cost about $50.00 Bucks or so.
SOURCE: reset keyless entry on 1998 honda civic
Okay, here goes-
1. Turn Key to on position.
2. Push and hold **valet button on the stock radio.
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
Door locks will cycle one time.
3. Press any button on remote one time within 20 seconds. Door locks will cycle again.
4. To program up to 4 additional remotes repeat step 3 for each additonal remote.
5. Turn key off programming is complete.
Thanks for using Fixya, please rate if this helps :)
SOURCE: keyless entry on honda civic 2006 not working
The keyless entry is designed to work with the doors closed (closed - not locked). If the door ajar sensor thinks the door is open the keyless entry is disabled. When you manually lock the door it might tighten the door just enough to activate the keyless entry. I would try slamming all the doors closed and then see if the keyless entry works. If it still wont work have the wiring checked on the front door lock.
-
Press the UNLOCK button on the keyless entry transmitter.
-
Insert a valid key into the ignition and start the vehicle.
?€¢
To disarm the CTD system in the armed mode:
-
Press the UNLOCK button on the keyless entry transmitter.
-
Insert a valid key into the ignition and start the vehicle.
?€¢
To disarm the CTD system when activated, alarming mode.
-
Press the UNLOCK button on the keyless entry transmitter.
-
Insert a valid key into the ignition and start the vehicle.
34 views
Usually answered in minutes!
×